Decorate DIY

Chevron Stripe Fridge DIY

chevron-fridge-diy

You may remember my striped wall from our old house. Ohhhhh, how I loved those stripes! Well now that we are renting & unable to paint the walls, I wanted to incorporate some stripes into our new house & I did so by adding a little pizzaz to our boring black refrigerator! The kitchen is the first room you see when you walk in our apartment, so this adds a fun focal point when you first walk in the door! I love how it turned out! It’s so simple, very inexpensive & easily removed, here is how I did it:

chevron-fridge-diy

chevron-fridge-diy

chevron-fridge-diy

 

Supplies::

White Contact paper – I got mine at Target in the drawer liner section for a few bucks
Measuring tape & T square ruler
Scissors or X-acto knife

 

Instructions::

1. I measured the width of our fridge & included extra for the sides of the doors so I could wrap the stripes around.
2. I cut five pieces of contact paper to the desired width.
3. I decided I wanted 3 big peaks on the front so I drew a grid pattern with my t-square by dividing the contact paper into 6 squares across & 3 down. I connected the points of intersection to create the zig zag pattern.
4. I lined all 5 sheets of contact paper together & taped them down to the table so I could cut out all 5 at the same time. (I only ended up using 5 stripes for the fridge, this will make 10, I wanted extras just in case.)
5. I carefully cut out the chevron stripes with my straight edge & x-acto knife.

chevron-fridge-diy

chevron-fridge-diy

6. Once they were all cut out, I placed a marker on the mid-point of the front of our fridge & very gently applied each stripe.

& that’s it!! Super easy, cheap & fun!!

chevron-fridge-diy

chevron-fridge-diy

I love how much big character it adds to my little kitchen & it’s perfect for renters because the contact paper easily peels off & leaves no residue!! I would love to see photos if you try this too! Let me know if you have any questions. xoxo. meghan

Leave a Reply

Your email address will not be published. Required fields are marked *